IRON RIDGE CAMPERS · CUSTOM MIDSIZE TRUCK CAMPERS
Base Camp for Jeep Gladiator
Lightweight, hard-sided utility for the five-foot pickup bed
A custom-fitted aluminum pop-up truck camper that keeps the bed usable for equipment while providing a rigid-wall raised sleeping space. Every Base Camp is custom-built around your truck’s dimensions, mounting points and intended use.
Based in Charlotte, North Carolina · Nationwide delivery options

530–685 lbs
Published base-weight range for 5.5-ft and 8-ft Base Camp models, before options. Your custom Jeep camper will have its own estimated weight.
Rigid aluminum walls
Hard-sided pop-up construction; not a soft-sided fabric tent.
Bed stays useful
Bed-rail mounting supports access to cargo space, subject to final camper configuration.
Custom truck fit
Dimensions, mounting, clearance and options are reviewed for your exact Gladiator.

Why Base Camp makes sense for a Jeep Gladiator
A lighter place to start
The weight-conscious Base Camp design leaves more potential payload available than a heavier camper concept. But passengers, cargo, accessories, camping equipment and the camper all count against the Gladiator’s actual payload rating. The available passenger and gear allowance is determined from your exact truck and completed build.
Hard-sided pop-up construction
Unlike fabric pop-up walls, Base Camp uses rigid aluminum walls and a manual roof lift. The roof lowers for travel and raises at camp.
Keep the truck bed functional
The shell mounts to compatible bed rails rather than occupying the entire bed with a conventional slide-in floor plan. Your rear access, gear storage and bed accessories are addressed in the custom design.
Custom-built for the Gladiator’s short bed
Jeep lists the 2026 Gladiator bed at 60.3 inches long and 56.8 inches wide. For the Gladiator’s shorter bed, we custom-build the Base Camp shell around the truck’s actual bed dimensions, rails and clearance requirements. See Jeep’s official Gladiator dimensional FAQ.
What we check
- Model year, trim, cab roof and bed dimensions
- Bed rails, liners, Trail Rail hardware and tie-down points
- Tailgate, rear access and cab/roof clearance
- Suspension, loaded axle/tire limits and center of gravity
- Estimated final camper weight with selected options
How much can my Jeep carry?
Jeep advertises up to 1,720 lbs of payload on certain 2026 Gladiator configurations, but other versions carry less. Use the rating on your own truck’s Tire and Loading Information label; a model-wide maximum is not your vehicle’s allowance. See Jeep’s official payload information.
The Truck Fitment Guide provides a starting screen, not a certification for a custom Gladiator fit.
Jeep Gladiator Base Camp specifications and fitment
| Specification | What to know |
|---|---|
| Camper type | Bed-rail-mounted hard-sided aluminum pop-up with manual lift |
| Published Base Camp weights | 530–685 lbs for the 5.5-ft and 8-ft base campers before options. The custom Gladiator build is weighed or estimated for its own specifications. |
| Jeep Gladiator bed (2026) | 60.3 in. long (tailgate closed), 56.8 in. wide, per Jeep’s published specifications |
| Gladiator configuration | Custom-sized and mounted for your Jeep Gladiator. Final camper weight depends on the selected dimensions and equipment. |
| Truck payload | Varies significantly by year, trim and equipment. Verify the specific truck’s door-jamb label. |
| Starting price | Base Camp starts at $12,995; custom Gladiator pricing provided by quote. |
If you drive another midsize pickup, including a Tacoma, Ranger, Colorado or Frontier, we can review a custom Base Camp design using the same truck-specific process. Compatibility is assessed individually.
Jeep Gladiator camper FAQs
Do you make Base Camp specifically for the Jeep Gladiator?
Yes. We custom-build the Base Camp to your Gladiator’s approximately five-foot bed, with shell dimensions, mounting, rear access and clearances tailored to your truck. We confirm the design and weight requirements before production.
How does Base Camp weight affect people and gear in my Jeep?
The 530–685 lb reference range applies to 5.5-ft and 8-ft base campers before options, not a finished Gladiator-specific build. The remaining room for people and gear depends on your Jeep’s door-label payload and the completed camper’s weight. Passengers, accessories, cargo and trailer tongue weight all count toward your truck’s limits.
Is Base Camp a hard-sided pop-up or a fabric tent?
It is a hard-sided aluminum pop-up camper with a manually raised roof and rigid upper walls. Custom sizes and options are reviewed before the build.
Can I keep my Gladiator’s tailgate and bed accessories?
We design the camper around your truck’s bed and discuss the accessories you want to keep, including the tailgate. The rear-door style and rail mounting are selected to match the confirmed clearances.
Are the Jeep Gladiator images actual completed customer builds?
No. Gladiator-specific imagery here is an illustrative design concept. The real Base Camp photo on this page shows a camper on a different truck. Every Gladiator build is designed around its owner’s truck.
Start a custom Gladiator Base Camp build
Send your Gladiator’s year and trim, door-label payload, photos of the bed rails, modifications and the gear you intend to carry. We will discuss the proposed camper dimensions, mounting and estimated option weight before you order.
Base Camp options · Base Camp product details · Compare campers
Concept images are illustrative, not proof of a completed Gladiator fitment. Jeep and Gladiator are trademarks of FCA US LLC; Iron Ridge Campers is not affiliated with or endorsed by Jeep.
