Iron Ridge Campers home

IRON RIDGE CAMPERS

Truck Camper FAQ

Wondering what fits your truck, how to order, or what to do with the camper in winter? Start here.

White Ford dually with the Iron Ridge Expedition roof raised and rigid fiberglass walls visible

Will an Iron Ridge camper fit my truck?

We build each camper to fit the truck it will go on. Send your year, make, model, bed length or flatbed dimensions, and any bed accessories. We’ll check dimensions, mounting points, and clearance before we finalize the design.

Can my truck handle the camper’s weight?

Base Camp is the lighter option and can work with many pickups, especially in a simpler setup. For a larger or more fully equipped camper, start with a three-quarter-ton truck or heavier. Check your truck’s payload, axle, and tire ratings with the camper, water, gear, passengers, and any trailer tongue weight included.

Truck fit and mounting

How do the campers attach to my truck?

Base Camp clamps to the truck’s bed rails. Backcountry and Expedition typically use turnbuckles connected to approved inside-bed mounting points or bed corners. Flatbed builds may need purpose-built brackets. We confirm the mounting plan for your truck before the build.

Which Iron Ridge camper should I choose?

Choose Base Camp for a lighter aluminum hard-sided pop-up with a manual lift and room for a DIY setup. Backcountry has a manual-lift soft-sided pop-up. Expedition adds an electric lift and rigid fiberglass pop-up walls. Compare all three trims.

Can I tow a boat or trailer with the camper installed?

Yes, when the loaded truck, camper, hitch, and trailer are within the ratings for your setup. Tell us what you tow so we can discuss hitch and tailgate clearance. Include loaded trailer tongue weight when checking truck payload.

Can I keep my factory tailgate?

It depends on the camper and rear opening. Base Camp’s flip-up hatch and half barn doors can retain the tailgate. The optional full-height barn door lets you remove it. Send us your truck and trailer details if tailgate clearance or backup camera placement matters.

Materials and customization

Do you use wood in your campers?

Some builds use wood for cabinetry or interior trim. All Iron Ridge campers use an aluminum frame and a welded aluminum exoskeleton approximately 0.118 inch thick (3 mm), built for strength and long-term use.

Can you color-match my truck?

We can powder coat your camper in a RAL color for a modest added charge. Pick the closest shade to your truck’s paint. Exact automotive color matching is unavailable.

Can I configure my camper for off-grid trips?

Yes. Backcountry and Expedition share options such as solar charging, lithium batteries, water storage, and diesel heat. Choose the equipment around your trips, power needs, and truck payload. Explore Backcountry and Expedition options or Base Camp options.

Can I carry gear on the camper roof?

Ask about a compatible rack and the limits for your particular roof, lift, and mounting hardware. Tell us what you plan to carry, including its weight, so we can confirm the setup and whether gear must come off before raising the roof.

Ordering, lead times and demos

How do I order a camper?

First, tell us what you drive and how you camp. We’ll talk through what fits and send you a free quote.

If you’d like to go ahead, we charge $250 for the custom CAD design and apply the full amount to your camper purchase when you order.

Once you approve the design and layout, a 50% deposit gets the build started. Pay the remaining 50% when you pick up near Charlotte. If the camper is shipped or picked up by a third party, the balance is due before we release it.

How long does it take to get my camper?

Plan on 4 to 6 months after we receive the deposit and you approve the final design. Most builds are closer to four months, but some take six.

Do you keep any campers in stock?

We build to order. About every six months we switch out our show demos, which have different layouts or options. If one is available, it comes at special demo pricing with our one-year warranty. Ask us what’s available.

Removal, storage and winter care

Does the camper have to stay on my truck?

No. Base Camp comes off like a truck cap. Optional manual lift legs with wheels let you roll it around a garage when supported and used as directed.

Backcountry and Expedition come with four corner jacks, with electric jacks available as an option. On firm, level ground, follow the unloading instructions for your build. Disconnect the mounting hardware and any vehicle connections, raise the camper just enough to clear the truck, then drive the truck out slowly. Lower the camper close to the ground for stability. For long-term storage, ask us about a support frame designed to carry the camper at its designated support points.

Can I use my camper off the truck?

Yes, if your build is set up and supported for off-truck use. Lower the camper on firm, level ground and use a stable support structure under the frame at the designated support points. Before using the cabover bed, confirm that the setup is supported or secured against tipping. Ask us to confirm the support arrangement for your camper before anyone enters or sleeps in it.

Do I need to winterize my camper?

Yes. If your camper will be exposed to freezing temperatures, winterize the entire plumbing system before storage. Follow the procedures for your build to protect the tanks, water heater, pump, lines, faucets, and indoor and outdoor showers. Use RV plumbing antifreeze only where the equipment instructions call for it, and follow your battery manufacturer’s storage and charging guidance.

Example Expedition interior with a galley, refrigerator, bench and table

Have a truck or layout in mind?

Tell us what you drive, where you camp, and what you’d like to bring along. We’ll talk through the options and put together a free quote.