Iron Ridge Campers home

IRON RIDGE CAMPERS

Expedition

Starting at $24,995. Estimated starting weight: 1,200 lbs. Starting figures apply to the base configuration. Options and dimensions can change the final price and loaded weight.

Electric-lift hard-sided pop-up truck camper

Raise the Expedition’s roof with an electric lift. Rigid fiberglass upper walls help keep the sleeping area quieter and better insulated. We build each Expedition to fit your truck and the way you camp.

Iron Ridge Expedition on a white dually with its hard-sided roof raised against an illustrated Blue Ridge mountain backdrop
Expedition shown with an edited mountain backdrop.

Electric roof lift

Raise or lower the roof with the electric lift.

Rigid fiberglass upper walls

The solid walls help keep heat in and outside noise down.

Welded aluminum construction

Powder-coated aluminum frame and a one-piece aluminum roof, both approximately 0.118 inch thick.

White Ford dually with the Iron Ridge Expedition roof raised and rigid fiberglass walls visible
Roof raised at camp.
Side view of a white pickup carrying an Iron Ridge camper with its roof lowered on a Blue Ridge road
Expedition travel configuration with the roof lowered. Illustrated Blue Ridge road scene.

Expedition construction and equipment

Electric pop-up and lift hardware

The electric lift raises the roof and rigid fiberglass upper walls. The roof assembly uses four 304 stainless steel hydraulic strut sets, four 304 stainless steel X-bracket sets, and four latch sets. The raised pop-up section measures approximately 35.4 inches high inside.

Aluminum shell, roof and insulation

The body uses formed, powder-coated aluminum approximately 0.118 inch thick and an all-welded aluminum frame. The one-piece aluminum roof has a thermally quilted ceiling and a waterproof solar panel connection. High-density, flame-retardant XPS insulation is approximately 0.98 inch thick in the walls and 1.18 inches in the floor.

Sleeping and dining

An extra-large double bed pulls out in the cabover. Add the bed board to turn the dinette into a second sleeping area. The dinette has a lift-up table. The bed and seating use 5D cushioning and high-density foam, with leather upholstery.

Water system

A SEAFLO Professional RV 12V quiet water pump supplies water. Fill the tank through the gravity-fed inlet and check the level with the sensor and gauge.

Electrical and lighting

The interior includes an integrated switch panel, a 12V automotive-style outlet, a multiport USB outlet, and LED lighting.

Mounting equipment

Four quick-release manual jack legs are included.

What trucks fit the Expedition?

We build Expedition for 5½-foot, 6½-foot, and 8-foot pickup beds and custom flatbeds. Start with a three-quarter-ton truck or heavier. The electric lift and rigid fiberglass walls add weight.

Bed length is only one part of fit. Check your truck’s payload and axle ratings against the loaded camper, people, gear, water, and trailer tongue weight if you tow. Consult your truck’s loading label and owner’s manual, then send us your truck details to discuss a configuration.

Plan the interior around your trips

Tell us how many people need a bed, whether you like to cook inside or out, and what gear needs its own spot. The photos show one finished layout.

Expedition cabover sleeping platform, side windows and ceiling lighting
Cabover sleeping area and raised hard-side walls.
Example Expedition interior with a galley, refrigerator, bench and table
Example galley and seating arrangement.

Backcountry trips

Think about how much water and power you use and where you’ll keep your recovery gear.

Campgrounds and vacations

Make room for an indoor kitchen, a place to sit, and the bathroom setup you prefer.

Beach, fishing, and boating

Leave room for rods and wet gear, and consider an outdoor rinse station.

Motorsports weekends

Set up a place to rest between sessions, with storage for helmets and race gear.

Expedition truck camper with its wraparound awning open at a wooded campsite
Expedition with the optional awning open.

Backcountry and Expedition options

Backcountry and Expedition share the same options catalog. Choose from indoor or outdoor cooking, refrigeration, heat and A/C, solar and batteries, a shower or wet bath, awnings, and storage. We’ll check what fits your truck and floor plan.

Compare your setup before you order

Start with the options you’ll use, then ask us to check fit and put together a quote for your truck.

Compare all three campers · See camper options · Open the Truck Fitment Guide

Expedition camper FAQ

How does Expedition differ from Backcountry?

Expedition has an electric lift and rigid fiberglass pop-up walls. Backcountry uses a manual lift and soft pop-up walls. Both share the same options lineup.

Can I choose my own Expedition layout?

Yes. Tell us what you’d like inside and we’ll work through a floor plan that fits your truck.

Can I tow a trailer with the Expedition installed?

That depends on your truck, hitch, loaded camper, and trailer. Check payload, axle, hitch, and combined weight ratings for the complete setup.

White dually carrying the Expedition and hitched to an enclosed race trailer
One owner’s Expedition and enclosed race-trailer setup.

Start your Expedition build

Send your truck’s year, make, model, bed length or flatbed dimensions, and a short description of how you camp. If you plan to tow, include your trailer setup.