Iron Ridge Campers home

IRON RIDGE CAMPERS

Backcountry

Starting at $19,995. Estimated starting weight: 950 lbs. Starting figures apply to the base configuration. Options and dimensions can change the final price and loaded weight.

Lightweight soft-sided pop-up truck camper

Backcountry is a custom slide-in camper with fabric upper walls and a roof you raise by hand. The soft sides and manual lift save weight compared with a similarly equipped Expedition.

Dark Iron Ridge Backcountry slide-in camper with its fabric pop-up raised against an edited Blue Ridge campground backdrop
Backcountry with the roof raised, shown against an edited campground backdrop.

Manual roof lift

Stainless steel lift hardware supports a soft-sided pop-up that packs down for travel.

Welded aluminum frame

Powder-coated aluminum construction with a one-piece aluminum roof skin.

Truck bed sizes

5½-foot, 6½-foot and 8-foot pickup beds, plus custom flatbeds.

Backcountry side profile showing the raised fabric pop-up and manual lift braces
Backcountry with its fabric upper walls and lift braces visible.

What we need to check fit

Send us your truck’s year, make, model, and bed measurements, along with a list of what you want to carry. We’ll check bed dimensions, cab clearance, and mounting points.

Final camper weight depends on the size, layout and equipment. Compare the loaded camper and everything you carry with your specific truck’s payload and axle ratings. See the truck fit and payload FAQ.

Backcountry standard features

Manual pop-up and windows

The manual pop-up pairs a one-piece aluminum roof cover with fabric upper walls. The roof assembly uses four 304 stainless steel hydraulic strut sets, four 304 stainless steel X-bracket sets, and four latch sets. The raised pop-up section measures approximately 35.4 inches high inside. Each tent window has four layers: a double-layer thermal liner, a clear panel, mosquito mesh, and a tear-resistant, waterproof outer layer.

Aluminum shell, roof and insulation

The body uses formed, powder-coated aluminum approximately 0.118 inch thick and an all-welded aluminum frame. The one-piece aluminum roof has a thermally quilted ceiling and a waterproof solar panel connection. High-density, flame-retardant XPS insulation is approximately 0.98 inch thick in the walls and 1.18 inches in the floor. A wear-resistant wood finish covers the interior walls and is approximately 0.118 inch thick.

Water system

A SEAFLO Professional RV 12V quiet water pump supplies water. Fill the tank through the gravity-fed inlet and check the level with the sensor and gauge.

Storage, doors and lighting

The lockable aluminum gull-wing window opens upward, and the entry door has an opening window. A sunshade and mosquito screen are included. Exterior storage includes a front aero compartment, two rear aluminum boxes, and a lockable passenger-side extension approximately 20 to 24 inches deep with a lower track and top cover. The camper has three exterior lights and six clearance lights.

Sleeping and dining

An extra-large double bed pulls out in the cabover on an aluminum platform approximately 79 by 61 inches. Add the bed board to turn the dinette into a second sleeping area. The dinette has a lift-up table. The bed and seating use 5D cushioning and high-density foam, with leather upholstery.

Electrical and lighting

The interior includes an integrated switch panel, a 12V automotive-style outlet, a multiport USB outlet, and LED lighting.

Mounting equipment

Four quick-release manual jack legs are included. Standard installation equipment also includes four ratchet straps and four mounting points. Confirm the mounting method for your truck.

Make room for the gear you bring

Want a kitchen, a wet bath, a place to sit, or storage long enough for fishing rods? Tell us what you need to fit and we’ll work it into the layout where space allows.

Backcountry example interior with a cabover bed, soft-side windows, seating and galley
One Backcountry layout with a galley and seating.
Example camper galley with a covered sink and an induction cooktop
Example galley with a covered sink and induction cooktop.

Backcountry and Expedition share the same options catalog. What fits depends on the size, floor plan, and truck. See the Backcountry and Expedition options.

Can I take a soft-sided camper to a national park?

Check the rules for your specific campground before booking. Some sites require completely hard-sided units. For example, Fishing Bridge RV Park in Yellowstone requires hard-sided camping units.

For a hard-sided-only site, look at Base Camp or Expedition and ask the campground if it accepts your exact camper.

Layered soft-side Backcountry windows above an example refrigerator and rear entry
Layered fabric windows on a Backcountry example build.

Compare your setup before you order

Start with the options you’ll use, then ask us to check fit and put together a quote for your truck.

Compare all three campers · See camper options · Open the Truck Fitment Guide

Start your Backcountry build

Tell us what you drive and how you camp. We’ll talk through fit, layout, and options and put together a free quote.

Compare all Iron Ridge camper trims