Iron Ridge Campers home

IRON RIDGE CAMPERS

Base Camp

Starting at $12,995. Estimated starting weight: 250 lbs. Starting figures apply to the base configuration. Options and dimensions can change the final price and loaded weight.

Hard-sided pop-up truck camper

Base Camp is a lightweight aluminum truck camper with rigid pop-up walls and a roof you lift by hand. It mounts to the bed rails, leaving the bed open for gear or a DIY interior.

Base Camp hard-sided pop-up camper on a white pickup with the roof raised and rear hatch open

Mounts to the bed rails

Fits compatible pickup beds using a truck-cap-style mounting system.

Manual lift

Lift the roof by hand at camp.

Open truck bed

Use the bed to haul gear or build your own interior.

Base Camp on a pickup with the rear hatch and tailgate open, showing the usable truck bed
Flip-up rear hatch shown with the factory tailgate lowered.

Sized to your truck bed

Base Camp sits on the pickup’s bed rails. Many trucks can use clamps like the ones used on a truck cap. We’ll check your bed and rails to see which clamps and mounting points fit.

Bed width, rail shape, cab clearance, and tailgate position can vary by year and configuration. We build to your truck’s measurements and confirm how it will mount before fabrication.

Keep the bed open for gear

Load up your fishing tackle, hunting gear, or recovery equipment. If you haul a dirt bike, check that it fits through the opening and under the closed roof. The open bed also leaves room for removable drawers or a DIY interior.

Base Camp is a good starting point for a first camper or a simple setup for off-road trips. Its lighter design is also worth a look if your pickup has limited payload.

Interior view of the Base Camp from the truck bed, showing the platform and open side hatch
View from the truck bed with the side hatch open.
Base Camp with the roof raised and rigid upper panels visible beside a lake
Base Camp with its roof raised and rigid sidewalls open.

Hard sides, even with the roof up

The aluminum shell uses a welded frame and rigid pop-up walls. Lift the roof by hand at camp, then lower it for travel.

Some campgrounds restrict soft-sided pop-ups and allow only hard-sided units. Yellowstone’s Fishing Bridge RV Park is one example. Check with your campground before booking to confirm it accepts your specific camper configuration.

Choose how you cook and get in

Add a flip-up kitchen for cooking outside. At the rear, choose an overhead hatch, half barn doors that keep the tailgate, or a full-height barn door that lets you remove it.

Side profile of a pickup with a Base Camp and its tailgate lowered
Example with the tailgate down and the awning open.

Base Camp fit and camping FAQs

Can I use standard truck-cap clamps?

Many trucks can use truck-cap-style clamps. We’ll confirm which ones fit your rails and where they should attach.

Will Base Camp fit a smaller pickup?

It may. We’ll check the bed shape and mounting points first. Check your truck’s payload and axle ratings with the camper, passengers, gear, and any trailer tongue weight included.

Can I camp where soft-sided pop-ups are restricted?

Base Camp has rigid upper walls. Ask the campground to confirm your exact camper configuration against its current rules before booking.

Can I keep my factory tailgate?

Yes. Base Camp offers rear configurations that retain the factory tailgate and a barn-door option designed to replace it.

Compare your setup before you order

Start with the options you’ll use, then ask us to check fit and put together a quote for your truck.

Compare all three campers · See camper options · Open the Truck Fitment Guide

Let’s check your truck fit

Send us your truck’s year, make, model, and bed length. Tell us what you haul and whether you’d like to keep the tailgate. We’ll tell you what to measure next.