Iron Ridge Campers home

Custom aluminum truck campers

Iron Ridge Campers is based in Charlotte North Carolina, with nationwide shipping and delivery.

We build pop-up campers for your truck and the trips you take. Choose an open-bed Base Camp or a slide-in Backcountry or Expedition. Tell us what you drive and we’ll help you narrow it down.

Compare the three campers

Built for 5½-foot, 6½-foot, and 8-foot pickup beds, plus custom flatbeds. We confirm fit for your specific truck.

8-foot Iron Ridge Expedition camper with the roof raised, seen from the passenger side

Based in Charlotte North Carolina

Welded aluminum fabrication
Custom pop-up truck campers. Nationwide shipping and delivery.

Overland Expo East exhibitor
We’ve brought Iron Ridge Campers to Overland Expo East.

Official Sponsor of NASA Southeast
NASA members can ask about their member discount.

Which Iron Ridge camper is right for you?

Base Camp hard-sided pop-up camper on a white pickup with the roof raised and rear hatch open

Base Camp

Keep your truck bed open.

A bed-rail-mounted aluminum camper with rigid pop-up walls and a manual lift. Keep the bed free for gear or build out the interior yourself.

See Base Camp

Backcountry side profile showing the raised fabric pop-up and manual lift braces

Backcountry

Get a lighter slide-in.

A slide-in with fabric pop-up walls and a roof you raise by hand. Choose it if you want less weight than a similarly equipped Expedition.

See Backcountry

Expedition truck camper with its wraparound awning open at a wooded campsite

Expedition

Raise the roof with an electric lift.

A slide-in with rigid fiberglass pop-up walls and an electric roof lift. Choose it if you want hard sides around the sleeping area and powered setup.

See Expedition

Compare models side by side

Scroll the table sideways to compare all three campers.

Iron Ridge pop-up truck camper comparison
SpecificationBase CampBackcountryExpedition
Starting price$12,995$19,995$24,995
Est. starting weight250 lbs+950 lbs+1,200 lbs+
Mount styleBed-rail-mounted shell. Keeps the truck bed open.Slide-in camperSlide-in camper
Pop-up wall materialRigid aluminumInsulated heavy-duty fabricRigid fiberglass upper walls
Roof liftManualManualElectric
Truck bed compatibility5.5-, 6.5- and 8-ft pickup beds. Custom flatbeds require mounting review.5.5-, 6.5- and 8-ft pickup beds. Custom flatbeds require design review.5.5-, 6.5- and 8-ft pickup beds. Custom flatbeds require design review.
Best forHalf-ton shoppers, gear hauling and DIY interiorsLightweight, payload-conscious slide-in travelFour-season comfort and powered setup
Model detailsExplore Base CampExplore BackcountryExplore Expedition

Starting figures are for base configurations. Bed dimensions, mounting points, options and loaded weight must be checked for your truck.

Walk through an 8-foot Expedition

See what one finished Expedition build looks like, from the raised roof to the interior layout. Features shown are specific to this build.

Watch the 8-foot Expedition walkthrough on YouTube

Will it fit my truck, and what will it weigh and cost?

Start with your truck’s year, make, model, and bed or flatbed dimensions. If you know your truck’s payload rating, send that too. Tell us what you carry and whether you tow.

Truck Fit & Payload Checker

Screen the three models using the payload on your truck’s driver-door label. This is a weight estimate, not a fit approval.

The calculator needs JavaScript. You can still send us your truck details for a fit review.

Confirm the installed camper weight, bed and cab clearances, mounting, center of gravity, and the truck’s GVWR, axle and tire limits before ordering. For a converted flatbed, verify the current truck weight and ratings instead of relying on an uncorrected pre-conversion label.

Request a free fit review & quote
What you want to knowWhat we’ll check
Will it fit?Bed dimensions, cab clearance, and how the camper will mount to your truck.
What will it weigh?The estimated weight with the equipment you choose. Allow for water, gear, passengers, and trailer tongue weight if you tow.
What will it cost?We’ll give you a free quote for the model, size, and options you’re considering.
Truck fit, camper weight, and quote details.

Open the Truck Fitment Guide

Send my truck details

Side profile of the Expedition on a white dually with its pop-up roof lowered for travel

What comes with the camper, and what can I add?

What defines each model

Base Camp has a bed-rail-mounted aluminum shell, rigid pop-up walls, and a manual lift.

Backcountry is a soft-sided slide-in with a manual lift and a one-piece aluminum roof.

Expedition is a slide-in with rigid fiberglass upper walls, an electric lift, and a one-piece aluminum roof.

See Base Camp options

Base Camp on a pickup with the rear hatch and tailgate open, showing the usable truck bed

Upgrades worth looking at

Base Camp outdoor kitchen and 5.3-gallon road shower. Cook and rinse off outside while keeping the truck bed open.

Backcountry or Expedition wet bath with cassette toilet. Consider it if an indoor shower and toilet are worth the floor space.

Solar and lithium batteries. Start with what you run and how long you stay away from hookups.

Diesel heat or 12-volt A/C. Choose for the weather you camp in and the power you have.

See Backcountry and Expedition options

Example Expedition interior with a galley, refrigerator, bench and table
Example layout with optional equipment.

Your quote lists what’s included, what’s optional, and which upgrades fit together.

How do I go from a quote to a finished camper?

1. Tell us about your truck

Send your truck details and what you’d like to do with the camper. We’ll talk through fit, layout, and options and put together a free quote.

2. Work through the design

If you move ahead, the custom CAD design fee is $250. We apply the full fee to your camper purchase when you order.

3. Approve the design and start the build

Your 50% deposit starts production after you approve the design. Plan on 4 to 6 months from final design approval and receipt of the deposit.

Aluminum camper frame during construction
An aluminum camper frame during construction.

Questions buyers ask before ordering

Which Iron Ridge camper should I look at for a half-ton truck?

Start with Base Camp. Its bed-rail-mounted design keeps the bed open and starts at 250 lbs. Verify the door-label payload, loaded axle and tire limits, mounting points and actual bed dimensions before choosing a camper.

Can I keep my factory tailgate with Base Camp?

Yes. Choose the flip-up rear hatch or half barn doors to keep the tailgate. Choose the full-height rear barn door if you plan to remove the tailgate. We confirm rear access and clearance for your truck during the fit review.

Can I customize the camper layout?

Yes. Tell us what you carry, how you camp and which options you want. We review layout options, their weight and whether they work together for your truck during the custom CAD design process.

Read the full truck camper FAQ

Latest From the Road

View all articles

Let’s see what fits your truck

Tell us what you drive, what you bring along, and where you like to camp. We’ll help you narrow down the models and put together a free quote.

Prefer email? info@ironridgecampers.com